E-201epoxy Ceramic Tile Beauty Sealant
- Model NO.: E-201
- Morphology: Solid-State
- Material: Silicone
- Main Agent Composition: Rubber
- Promoter Composition: Complexing Agent
- Color: All Color as Customer Requirement
- B Volume: 150ml
- Price: Competitive
- Raw Material: From Wacker
- Certification: MSDS
- Trademark: CSJ
- Origin: China
- Bonding Function: Instant Adhesive
- Application: Construction, Woodworking, Packing
- Classification: Room Curing
- Characteristic: Weatherability
- Composition: Inorganic Material
- a Volume: 150ml
- Quality: High Level
- MOQ: 100cartons
- Level: High End Quality
- Shelflife: 12 Month
- Specification: 300ML
- HS Code: 3506100090
Epoxy Ceramic Tile Beauty Sealant
2017 New high tech materials, adopted with many kinds of imported nanometer polymer and high quality pigments, cover the surface of the tile gaps, and make a protecting film like ceramics, to resolve problems of dirt and difficulties of cleaning.
- Eco friendly, non-toxic;
- 1:1 intelligent mixing;
- Piston injection design;
- Hard as ceramic, long service life;
- High toughness;
- Yellowing resistance;
- No sagging, no flow;
- Water and mildew proof.
- Preparation: Tile decoration grout, injection dispenser, texture paper, knife, gap cleaning awl, edge pressing ball, water scraper, materials scraper, etc.
a. Cleaning the tile gap and stick the texture paper
Keep 1mm groove, with the paper on both sides, must keep the crossing area clean, stick the texture paper close to the gap, (about 1mm);
b. Put the cartridge into the dispenser
Press the button to pull the rod out and open the cartridge to keep the opening upside, screw the mixer to the opening, then put the cartridge into the dispenser. The opening of the mixer can be adjusted by cutting to fit the gap sizes. (smaller than the gap.)
c. Start to process
At the beginning, need to remove the first mixed grout, about 40cm, for a new hand, suggest to inject 20-50cm for practice, then increase the length accordingly.
Smoothen the grout by using water scraper, edge pressing ball and even finger. If still any grout remain inside the dispenser, lay it flatwise. Need a materials scraper to hold under the opening of the mixer. If find any uneven place, keep injection.
After all gaps of the paper smoothened, remove the paper and keep in stand for 24 hours.
1.Remove the first mixed grout about 40cm
2.Keep the grout in the mixer opening no longer than 20 minutes, to avoid hard squeezing the grout, so make sufficient preparation in advance.
3. Gap width above 1.5mm, to make sure the under gap flat without dirts.
4. The grout can be completely hardened after 12 hours, but can be longer if the temperature is low, so it is normal if slow in winter.
5.If the grout cannot be used in one time, remember to clean the grout in the mixer opening, and recap to keep in cool place for 12 months, replace a new opening when reuse.
By T/T, 30% as deposit, the rest to be paid after seeing the BL copy
Cartridge: 300ml 24 cartridges/carton
Storage and transportation:
18 months stored in a dry and ventilated place below 27 ºC in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB/T 18583-2008
Detailed instructions can be obtained directly through the company or a specific agent.
Service hotline: 400-8300-600
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What are your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shipment.
Q: Can you give us private design?
A: Yes, we offer OEM service, can making your own brand.
Q: Can we visit your factory?
A: Yes, warmly welcome to visit us at any time.
Q: What are the documents we provide?
A: Packing list, commercial invoice, CO, BL according to your demand.
Why choose us:
- Chuang Shi Ji industrial Co., Ltd. established in 1993, one of the biggest professional silicone sealant manufacturers in China, mainly deals in the decorating and building materials with our brand "CSJ". With 20 years development, "CSJ" is a famous trademark and one of the top 10 brands in China.
- Chuang Shi Ji industrial Co., Ltd. is located in FOSHAN, Covering an area of 66666 in Foshan, which contains one mansion, two factories, one kindergarten, and a big village for employees.
- We import raw material from Wacker in Germany in order to ensure products quality, we invest over 17 million dollars in production equipment: four fully automatic sealant production lines .we introduce automatic equipment with 50K tons output per year. USD170.0 million annual sales in 2016
- CSJ silicone sealant have been send to all over the world for more than 20 years, some of our customers have done business with us together for more than 15 years.