General purpose silicone sealant in drum
Characteristics:
1.One component
2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
3. Non-discoloring.
4. Excellent adhesion to glass, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between -40 ºC~150 ºC
6. Excellent resistance ultraviolet radiation
7. Odorless
Application:
For a wide range of Aluminum doors and windows, plastic steel doors and windows, stainless steel, glass, Aluminum sheet, ceramics, sky light, roof, most of building material. Can not use for coated glass.
Limitations:
1.Cannot be used as structural sealant.
2.Not compatible with materials with grease or exudation.
3.The construction surface should be clean and dry.
4.Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5.Cannot be used on the substrate surface below 6ºC or above 40 ºC
Curing Time:
Track-free Time is between 15 to 20 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.
Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Color available:
White, grey, black, others of special order
Testing Standard: GB-16776-2005
TECHNICAL DATA SHEET
| No |
Item |
The standard |
Test result |
| 1 |
Appearance |
Have no grain, no agglomerations, no skinning, and no bubble. |
Pass the standard |
| 2 |
Density (g/cm3) |
±0.1 |
1.43 |
| 3 |
Droop degree
(mm) |
Uprightness |
≤3 |
0 |
| Level |
No damage |
No damage |
| 4 |
Skinning time (h) |
≤3 |
0.4 |
| 5 |
Elastic recovery ratio (%) |
≥80 |
97 |
| 6 |
Extrusion ability (ml/min) |
≥80 |
113 |
| 7 |
Tensile modulus
(MPa) |
23ºC |
>0.4 |
0.792 |
| 8 |
Cold-hot adhesive |
No damage |
No damage |
| 9 |
Under water adhesive |
No damage |
No damage |
| 10 |
UV radiation |
No damage |
No damage |
| 11 |
Definite Elongation |
No damage |
No damage |
Certificado
FAQ:
1.Can u send sample to us ?
Yes, the sample is free.
2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.
3.What's your guarantee?
10 years.
4.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.
5.How many days to produce one 20'container?
10-15days.
6.Can we visit factory?
Yes, warmly welcome to visit us at any time.
7.What are the documents we provide ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
Por qué elegirnos
1. Chuang Shi Ji industrial Co., Ltd. establecida en 1993, uno de los mayores fabricantes profesionales de selladores de silicona en China, se dedica principalmente a la decoración y materiales de construcción con nuestra marca "CSJ". Con 20 años de desarrollo, "CSJ" es una marca comercial famosa y una de las 10 mejores marcas en China.
2. Chuang Shi Ji industrial Co., Ltd. está ubicada en FOSHAN, cubre un área de 66666 en Foshan, que contiene una mansión, dos fábricas, un jardín de infantes y una gran aldea para empleados.
3. Importamos materia prima de Wacker en Alemania para garantizar la calidad de los productos, invertimos más de 17 millones de dólares en equipos de producción: cuatro líneas de producción de selladores totalmente automáticas. Introducimos equipos automáticos con una producción de 50 000 toneladas al año. USD170.0 millones de ventas anuales en 20164. El sellador de silicona CSJ se ha enviado a todo el mundo durante más de 20 años, algunos de nuestros clientes han hecho negocios con nosotros durante más de 15 años.
){kind=link}