High Performance Silicone Sealant for Engineering Sealing

• Bonding Function: Instant Adhesive
• Morphology: Solid-State
• Application: Construction, Woodworking, Fiber & Garment
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Natural Polymer
• Model NO.: CSJ-903
• Characteristic: Weatherability
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: All Color as Customer Requirement
• Packing: Cartridge
• G.W.: 430g
• N.W.: 490g
• Size: 30*20*24 Cm
• Density: 1.4
• Shelflife: 12 Month
• Usage: Structural Project, Great Glass
• MOQ: 100 Carton
• Level: High End Quality
• Certification: ISO, SGS, MSDS
• Transport Package: Carton
• Specification: 300ml
• Trademark: CSJ
• Origin: China
• HS Code: 3506100090
• Production Capacity: 50000000 CTN/ Year

Product Description

High Performance Silicone Sealant for Engineering Sealing (CSJ-903)

Characteristics
CSJ-903 is good for weatherproof curtain wall, is a high technology product, adopted with many kinds of imported  high quality pigments. The materials meet National Quality Standard GB/T14683-2003 . This sealant can cover the surface of widely aluminum, the tile gaps, and make a protecting film like ceramics, to resolve problems of dirt and difficulties of cleaning.
 
Range of Application
For a wide range of Aliminum doors and windows, aluminum alloy, glass sealing, good adhesive and  strong weatherproof. Performance on plastic steel doors and windows, glass, Aluminum sheet, ceramics.  


Operation Method
1. Preparation: Tile sealant, injection dispenser, texture paper, knife, gap cleaning awl, edge pressing ball, water scraper, materials scraper, etc.
2. Processing:
   a. Cleaning the tile gap and grout the sealant directly
   b. Put the cartridge into the dispenser
   Press the button to pull the rod out and open the cartridge to keep the opening upside, screw the mixer to the opening, then put the cartridge into the dispenser. The opening of the mixer can be adjusted by cutting to fit the gap sizes. (smaller than the gap.)
   c. Start to process
   At the beginning, need to remove the first mixed sealant, about 40cm, for a new hand,suggest to inject 20-50cm for practice, then increase the length accordingly.
   Smooth the sealant by using water scraper, edge pressing ball and even finger. If still any sealant remain inside the dispenser, lay it flatwise. Need a materials scraper to hold under the opening of the mixer. If find any uneven place, keep injection.
   After all gaps of smoothened, leave and keep in stand for 8 hours (12 hours in winter ).
   Remove the exceeded by scraper.
 



Features
1. Easily to handle, 1:1 injection, intelligence mixing, piston design for output;
2. Abrasion proof, high strength, waterproof, oil proof, dirty resistance, with good performance of self-cleaning,
3. Suitable for both wall and ground surface without any leak under any circumstance.
4. Earth-friendly, does not include any toxic, smell, formaldehyde and xylene etc.
5. Convenient and easy to handle, inject into the tile gap and clean with scraper or finger.
6. High decoration quality with rich and nature colors, glossy without fade.

TECHNICAL DATA SHEET

No	Item			The standard	Test result
1	Appearance			Have no grain, no agglomerations, no skinning, and no bubble.	Pass the standard
2	Density (g/cm3)			±0.1	1.43
3	Droop degree (mm)	Uprightness		≤3	0
		Level		No damage	No damage
4	Skinning time (h)			≤3	0.4
5	Elastic recovery ratio (%)			≥80	97
6	Extrusion ability (ml/min)			≥80	113
7	Tensile modulus (MPa)		23ºC	>0.4	0.792
8	Cold-hot adhesive			No damage	No damage
9	Under water adhesive			No damage	No damage
10	UV radiation			No damage	No damage
11	Definite Elongation			No damage	No damage

The Sealant Advantage


Attention
1. Remove the first mixed sealant about 40cm
2. Keep the sealant in the mixer opening no longer than 20 minutes, to avoid hard to squeeze the sealant, so make sufficient preparation in advance.
3. Gap width above 1.5mm, to make sure the under gap flat without dirts.
4. The sealant can be completely hardened after 12 hours, but can be longer if the temperature is low, so it is normal if slow in winter.
5. If the sealant can not be used in one time, remember to clean the sealant in the mixer opening, and recap to keep in cool place for 12 months, replace a new opening when reuse.


Payment
 By T/T, 30% as deposit, the rest to be paid after seeing the BL copy
 
Packaging
Cartridge: 300ml   24 cartridges/carton
 
Storage and transportation
18 months stored in a dry and ventilated place below 27 ºC in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
 
Testing Standard: GB/T14683-2003

Technical Services
Detailed instructions can be obtained directly through the company or a specific agent.
Service hotline: [phone]
 
Certificate 


Wacker Business Partner


FAQ
Q: Are you trading company or manufacturer?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What are your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shipment.

Q: Can you give us private design?
A: Yes, we offer OEM service, can making your own brand.

Q: Can we visit your factory?
A: Yes, warmly welcome to visit us at any time.

Q: What are the documents we provide?
A: Packing list, commercial invoice, CO, BL according to your demand. 

Why choose us

1. Chuang Shi Ji industrial Co., Ltd. established in 1993, one of the biggest professional silicone sealant manufacturers in China, mainly deals in the decorating and building materials with our brand "CSJ". With 20 years development, "CSJ" is a famous trademark and one of the top 10 brands in China. 
2. Chuang Shi Ji industrial Co., Ltd. is located in FOSHAN, Covering an area of 66666 in Foshan, which contains one mansion, two factories, one kindergarten, and a big village for employees.
3. We import raw material from Wacker in Germany in order to ensure products quality, we invest over 17 million dollars in production equipment: four fully automatic sealant production lines .we introduce automatic equipment with 50K tons output per year. USD170.0 million annual sales in 2016
4. CSJ silicone sealant have been send to all over the world for more than 20 years, some of our customers have done business with us together for more than 15 years.